Laser Air quality monitor PM2.5 PM10 Formaldehyde detector

Short Description:

Brand: Kanfur; Name: Air Quality Monitor; Color: White;
★ 7-IN-1 Air Quality Monitor: HCHO,PM2.5,PM10,Temperature (in ℃),Humidity,Time,AQI. Large and clear reading, with 3-color indicator AQI, know the air quality immediately from wherever you look at it.
★ Light Features: This air Quality Monitor You can also use it as a clock,Use MOD and ST to set the time.Turn on the light, easy to read at night and 24-hour testing.
★ ECO mode:Our Air Quality Monitor In ECO mode, it can be used continuously for about 120 hours, but the data detection speed is relatively slow. To ensure the accuracy of detection, place it in a ventilated environment (indoor or outdoor) for at least 3 hours before first use or after long storage.
★Easy to operate: Just press the ON/OFF switch button, all data will be displayed, Full LCD screen and tri-color indicator gives clear readings on particle polltants and its relative AQI level.Built-in 2200mAh lithium battery that runs up to 72 hours after full.
★ Advanced fans and sensors: This air quality monitor has a built-in fan to quickly draw in ambient air to allow REAL-TIME measurements. It incorporates a laser sensor to measure levels of dust particles and has a second electrochemical semiconductor sensor to measure formaldehyde(HCHO) levels.
Kanfur new laser air quality monitor, shows real-time readings of Formaldehyde, temperature and humidity PM 2.5 PM10, with the laser detector, create a healthier, more comfortable and energy-saving living environment.

Product Detail

Product Tags

Product Descriptions

This Air Quality Detector can monitor PM2.5, PM10 and formaldehyde in the air in real time. It has the features of long battery life and high accuracy. It can meet the measurement needs of PM2.5 PM10 and formaldehyde in various occasions, as well as to monitor and reflect the pollution of PM2.5, PM10 and formaldehyde in the air to ensure your health in the indoor environment.

air quality monitor 1


Product Name Air quality detector
Function Shows the PM2.5, PM10, formaldehyde, temperature and humidity
Product Size 106*99*32.2mm
Temperature range -10-50°C
Humidity range 20-95% RH
Packing list Host device * 1, Charger* 1, Charging cable * 1, Manual*1, Warranty card*1
air quality 1
air quality 2
air quality 2
air quality 3
air quality 4

Measurement range:

Technical indicators for measurement of PM2.5 and PM10 

Measuring range: 0-999ug/m3

Resolution: 1ug/m3

Accuracy: 5% FS (under standard test environment)

Technical indicators for measurement of formaldehyde

Measuring range: 0-5mg/m3

Resolution: 0.001mg/m3

Accuracy: 5% FS (under standard test environment)

Technical indicators for measurement of temperature

Measuring range: -20-80C



a. Before testing formaldehyde in the bedroom, living room, cloakroom and other spaces, the window and door should be closed for 10 hours before testing, and the testing result will be better. Detect multiple points in a room, and the average value of the readings at multiple points is the average content in the room air.

b. When the product is moved from one room to another for detection, a certain response timing is needed. After the reading is stabilized for about 5 minutes, the measured value is the true formaldehyde content of the detection point..

c. The measurement unit of PM2.5 of the product is ug/m3, which is not the same as the Average Quantification Indexed AQI which is published by the country.

d. The inhalation amount of particulate and prevalence rate displayed by the product are for reference only, and the source is based on the data of the paper of 'Chinese Journal of Environmental Science" 

  • Previous:
  • Next:

  • Write your message here and send it to us

    Product categories